Boston Industrial Engineering Sdn Bhd
NO 6, JALAN KEMPAS UTAMA 3/11,
TAMAN KEMPAS UTAMA,
81200 JOHOR BAHRU,
JOHOR, MALAYSIA.
+6010-2688600
Boston0102688600

Rotofluid Rotarty Gear Pump FTRN-050 / FTRN-100 / FTRN-150 / FTRN-200 / FTRN-300 / FTRN-400 / FTRN-500 / FTRN-600

Previous 2 / 10 Next

Rotofluid Rotarty Gear Pump FTRN-050 / FTRN-100 / FTRN-150 / FTRN-200 / FTRN-300 / FTRN-400 / FTRN-500 / FTRN-600 Rotofluid Rotary Gear Pump (Malaysia) Pump


Rotary Twin Gear Pump
Fluid Tech Systems offer “ROTOFLUID” brand gear pump Model “FTRN/FTRB/FTRX” Which is heavy duty foot mounting type positive displacement rotary twin gear pump. Model “FTRN/FTRB/FTRX” having three piece construction it can be easily cleanable and maintainable.  These pumps having a double helical refined gear and hardened grind finished shaft, double helical gear prevent axial load & side thrust which is help to increase life and performance of pump. 

These pumps are having flange at the end of suction and delivery which are available in 1/2'' to 6'' size. These pumps can be operated up to pressure of 10 kg/cm² with 8.30 LPM to 2083.00 LPM flow capacity.  These pumps are suitable for liquid up to viscosity of 1, 00,000 SSU and maximum temperature up to 200ºc.
Pump Selection
Model FTRN/FTRB : The self lubricated needle roller bearing type Model FTRN used for clean viscous liquid having sufficient lubricating property such as clean lube oil, Gear oil, Animal oil, Fish oil, Hydraulic oil, Honey, Vegetable oil, SAE lubricating oil for continues duty, However for Intermittent duty Bush Bearing type pump Model FTRB used. 

Model FTRX : This Model independent lubricated needle roller bearing type pump is suitable for handling of Crude oil, Dirty lube oil, HSD, Kerosene, LDO, Paints, Varnish, Wood Pulp, Liquid  which  have poor lubricant value. 

Model FTRBJ : This Model should be selected for liquid which tends to solidify at room temperature such as Bitumen, Furnace oil, Asphalt, Tar, Starch, Molasses, Naptha, RFO, Silicate, Wax, Soap solution. Because This model have jacketing construction facilitate the heating the pump by steam or thermic fluid.
Material  of Construction
Part Material For FTRN / FTRX Material For FTRB
Pump Body CI/CS CI/CS
Front Cover CI/CS CI/CS
Back Cover CI/CS CI/CS
Gland Cover CI/CS CI/CS
Rotor & Stator Shaft EN-19 EN-19
Gear EN-24/EN-353 EN-24/EN-353
Bush/Needle Bearing INA/IKO [Japan] Non-Ferrous
Wear Plate Non-Ferrous Non-Ferrous
Lifting Hook Mild Steel Mild Steel
R.V. Housing Mild Steel Mild Steel
R.V. Piston EN-8 EN-8
R.V. Spring Spring Steel Spring Steel
R.V. AD. Screw EN-8 EN-8
Sealing 'GFO' Teflone/Mechnical Seal ''GFO'' Teflone/Mechnical Seal
Key EN-8 EN-8
Dowel Pin EN-31 EN-31
Hex - Bolt Mild Steel Mild Steel
Technical  Specification
Model FTRN/FTRB/FTRX Suction & Delivery Size Capacity at 1440 RPM
LPM US GPM M³/hr
050-S 1/2'' x 1/2'' 8.30 2.20 0.50
050-M 1/2'' x 1/2'' 16.60 4.40 1.00
050-L 1/2'' x 1/2'' 25.00 6.60 1.50
100-S 1'' x 1'' 33.30 8.80 2.00
100-M 1'' x 1'' 50.00 13.20 3.00
100-L 1'' x 1'' 50.00 13.20 3.00
150-S 1½'' x 1½'' 83.30 22.00 5.00
150-M 1½'' x 1½'' 100.00 26.40 6.00
150-L 1½'' x 1½'' 125.00 33.30 7.50
200-S 2'' x 2'' 150.00 39.00 9.00
200-M 2'' x 2'' 166.00 44.00 10.00
200-L 2'' x 2'' 200.00 52.80 12.00
250-S 2 ½'' x 2 ½'' 250.00 66.00 15.00
250-M 2 ½'' x 2 ½'' 299.88 79.20 18.00
250-L 2 ½'' x 2 ½'' 333.30 88.00 20.00
300-S 3'' x 3'' 415.00 105.00 25.00
300-M 3'' x 3'' 449.82 118.00 27.00
300-L 3'' x 3'' 500.00 132.00 30.00
400-S 4'' x 4'' 599.76 158.40 36.00
400-M 4'' x 4'' 666.66 176.00 40.00
400-L 4'' x 4'' 833.30 220.00 50.00
500-S 5'' x 5'' 1000.00  264.00  60.00
500-M 5'' x 5'' 1250.00 330.00 75.00
500-L 5'' x 5'' 1499.00  396.00 90.00
600-S 6'' x 6'' 1660.00 440.00 100.00
600-M 6'' x 6'' 1832.00 484.00 132.00
600-L 6'' x 6'' 2083.00 500.00 125.00
Features
Heavy duty gear pump design for continuous application.
Herringbone rotor design eliminate side thrust.
Modified tooth profile enhance tooth life.
Floating gear design ensures uniform load distribution.
Optionally steam jacket available.
Double helical gear design prevent axial load.
Low leakage path by  design improve volumetric efficiency.
Shorter bearing span reduces bending effect.
Application
Power plant.
Steel plant.
Cement plant.
Bitumen plant.
Petroleum industries.
Refineries.
Pumping station.
All kind of liquid loading and unloading.

Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Ship to Name  
Shipping Address  
Attachment  
*only support gif, jpeg, jpg, png, pdf
Messages*  

Switch to Mobile Version